- Posts
- 83,231
- Location
- Embasinga stocæ
have yu got an infra red thermometer - to check temps at diff places. cud be invaluable.
Davies Craig EWP - preliminary results
- Thread starter WLJayne
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
:d
dd
dd
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
Yeh was gonna say I bet he does 
.
.
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
Who's idea was this?
DD
DD
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
No he doesn't!
DD
DD
- Posts
- 83,231
- Location
- Embasinga stocæ
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
You need a gate valve or summat to do that!
DD
DD
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
A simple restrictor works for me
DD
DD
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
I was thinking a simple plumbing valve like in the article on the previous page so that we can adjust the flow and find the best result .
.
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
Ok until someone knocks it! Oops new engine
DD
DD
- Posts
- 83,231
- Location
- Embasinga stocæ
use one of the screwdriver adjustable ones.
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
Yes if you can lock them it might be ok but otherwise no no no !!
!!
- Posts
- 83,231
- Location
- Embasinga stocæ
this do ya?
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
Yeh that'll easily fit under the bonnet . Lots of space in a 1.8.
. Lots of space in a 1.8.
- Posts
- 83,231
- Location
- Embasinga stocæ
Pegler Ball Valve Red 22mm | Screwfix.com
cheap, easy to adjust and easily removable handle .......?
cheap, easy to adjust and easily removable handle .......?
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
Yep I reckon that's ideal . There's a screwfix down the road so I'll be able to op in and buy one.
Will.
. There's a screwfix down the road so I'll be able to op in and buy one.Will.
- Posts
- 83,231
- Location
- Embasinga stocæ
maybe get a couple to play with, in conjunction with an infra red thermo.
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
Maybe if you lift it and put huge tyres on it'll run hotter?
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
Maybe if you lift it and put huge tyres on it'll run hotter?
Well if my insurance are happy with that I might as well replace the engine with a mas effect core and equip it with kinetic barriers and energy weapons. Now THAT would show the tratterers.
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
Well DD has managed to miraculously find the perfect implement for the job! A spre polybush about 31mm outer diameter and 15mm inner diameter. Think of it like colestorol - your heart has to work hader in a human circulatory system so its bad, but in the this case we WANT the heart to work harder so it should be ideal!
I'll probably fit it just before the rad inlet, it should be a simple as slipping it in and puttng a hose clip around the outside.
Btw my heater blow was actually fine, DD had just squashed the air outlet duct nearly flat with his steel toecaps! Once I straightened it out it was fine :hysterically_laughi.
I'll probably fit it just before the rad inlet, it should be a simple as slipping it in and puttng a hose clip around the outside.
Btw my heater blow was actually fine, DD had just squashed the air outlet duct nearly flat with his steel toecaps! Once I straightened it out it was fine :hysterically_laughi.
