Ok just an idea for a project. Is it possible to install, in an FL1 (2000 td4 equipped with TC and HDC) a system similar to the ones in more modern offroaders for overriding TC and can be programmed (difference in wheel sensor feedback) to kick in manually or automatically when 1 front and 1rear opposite wheels are off the ground and spinning freely so to transfer power to the tyres on the ground.
Thinking of using a programmable controller such as the raspi or smilar and tap in the abs sensors and or connect directly to the abs pump.
This would be a temporary system and not permanently installed.
I know this is essentially how the exsisting system in my FL1 works but not sure how sensitive if it works as I have never seen it work except in HDC.
Ideas? Also how does the FL2 system work what sensors does it use? Easier to retro fit an existing system from another vehicle/make?
OR any aftermarket kits who tap into the abs system as only one I found control the injectors and play with fuel supply.
Just looking for options and ideas.
Thinking of using a programmable controller such as the raspi or smilar and tap in the abs sensors and or connect directly to the abs pump.
This would be a temporary system and not permanently installed.
I know this is essentially how the exsisting system in my FL1 works but not sure how sensitive if it works as I have never seen it work except in HDC.
Ideas? Also how does the FL2 system work what sensors does it use? Easier to retro fit an existing system from another vehicle/make?
OR any aftermarket kits who tap into the abs system as only one I found control the injectors and play with fuel supply.
Just looking for options and ideas.