Converting a discovery 2 to 300tdi
- Thread starter danspann
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
fireblade7
Active Member
- Posts
- 487
- Location
- edinburgh scotland
hi dan ive just completed a disco 2 shell onto a rangerover chassis with a 300 tdi engine in it all working now and on the road
some people dont like the 300 but my opinion is no problem now as you can fix a 300 but td5 engines are not bullet proof like the 300
some people dont like the 300 but my opinion is no problem now as you can fix a 300 but td5 engines are not bullet proof like the 300
- Posts
- 41,195
- Location
- East Dorset
danspann I sympathise, having just had to remove the warped exhaust manifold. I also have a 300tdi. Just as many miles but very few problems, also more economical, and with a few cheap tweaks, feels as if it runs as well as the TD5. Only rider to this, the TD5 drives an automatic, but people with manuals say they are greedy beggars. Considered doing exactly what you are doing, but the other problems on the td5 to do with chassis rust etc, put me off. So have now got a Disco 1 lpg manual, so the TD5 will be on the market very soon.
I expect you'll have massive ecu type problems, as TD5s have so many other "features" that 330 tdis never had.
Just my five pennorth!
I expect you'll have massive ecu type problems, as TD5s have so many other "features" that 330 tdis never had.
Just my five pennorth!
danspann
Member
- Posts
- 98
Actually the only issue I've had thus far is getting the speedo to work... The driveshaft has been lengthened and shortened to suit and it drives.... Electrical is more or less sorted.
sierrafery
Well-Known Member
- Posts
- 17,105
- Location
- Arad/Romania
And how did you manage with the rev counter, the temperature gauge and the various warning lights?
