Clutch or gear box problem?? or dare i say both

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

series III

Member
Posts
73
Location
brittany france
Clutch seems to work okay. When driving there is normal travel and it engages the gearbox ok. The problem is selecting 1st or second. It is easer to select first after locating second and then moving forward into 1st.

worse when cold.

clean oil in Gearbox

any ideas before I start dismanteling the whole thing

its a '83 2,3 derv

ta

M

PS was left standing for 18months and now its being used a bit little probs keep appearing - some seem to go away all on there own.....but others haunt me in the early hours.:eek:
 
if clutch isnt clearing properly reverse will grate when selecting it ,if it selects well then 1st ,2nd baulk rings and probably dog teeth on the 2 gears
 
So i take it the release bearing is causing the wining noise, and likely need to replace the dog teeth and baulk rings on the 2 gears.

And while there fit a new clutch kit.
 
Back
Top