clutch change
- Thread starter the rock
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
stretchie_
Active Member
- Posts
- 476
- Location
- Gloucester
Hi mate, I have no idea myself but what vehicle is it?
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Engine. I did the box because it was shagged, but it's far easier to take the bonnet off, rad out and move it forward, not even a lot of work!!
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
how do you get to all the bell housing bolts without dropping the box down? can you reach them over the top of the engine and down the back between the bulkhead?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
remove engine mounts and drop engine down i prefer removing box
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
heres a good question for you, can I get the box out of a 72 range rover without taking the tunnel out?
looking in the dark at the scrapper with it half cut out I am not sure you could get the gearbox mounting bolts from underneath?
looking in the dark at the scrapper with it half cut out I am not sure you could get the gearbox mounting bolts from underneath?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
why not ,there only bolted to chassis
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
top ones would be a bastid to get any weight on-40 yars old itll need some!
i cut ot the floor and the heads off on the breaker but cant do that on me 72
i cut ot the floor and the heads off on the breaker but cant do that on me 72
