robbh
Crazier than a box of frogs on acid
- Posts
- 1,755
- Location
- Edge of the New Forest. Wiltshire
Evening all just thought I'd share a few pics of this afternoons work. 
Got fed up with grinding and welding the chassis on the floor so decided to make this.
Made it with a load of scrap pieces i found in the skip at work and adapted my homemade engine stand a bit to bolt on the chassis. Can turn it through 360 degrees and lock it in any position i desire.
Also the nasty looking piece of box that's attached to the back part of the chassis is only temporary and is tacked in place.
Should make the major amount of fabrication work i have planned a breeze
Got fed up with grinding and welding the chassis on the floor so decided to make this.
Made it with a load of scrap pieces i found in the skip at work and adapted my homemade engine stand a bit to bolt on the chassis. Can turn it through 360 degrees and lock it in any position i desire.
Also the nasty looking piece of box that's attached to the back part of the chassis is only temporary and is tacked in place.
Should make the major amount of fabrication work i have planned a breeze
