Chassis swap

Hi

I've got my chassis ordered today. I've gone for a 300tdi with a td5 rear. ( which I've been told is RoW model now ). I've got a fuel tank and new sender and tank cradle, now im after an exhaust system does anyone know what I need to order.

Cheers steve

Marsland?

Is it not RC who do bespoke ones?

whitstella said:

Hi
I've got my chassis ordered today. I've gone for a 300tdi with a td5 rear. ( which I've been told is RoW model now ). I've got a fuel tank and new sender and tank cradle, now im after an exhaust system does anyone know what I need to order.
Cheers steve

Click to expand...

If you haven't specified when ordering a bespoke chassis, will you not need to wait until it turns up to see where they have fitted the hangers?

Yeah marslands.

I've already seen the chassis. They are 300 tdi exhaust mounts in the middle it's got none on the tube tub outrigger then the 1 on the rear crossmember. Land rover did make this version of the land rover with a 300 engine and a td5 tub,called rest of the world. But looking for an exhaust system is tricky.

I had some issues with this, I solved them by bending the central hanger and getting the back section welded. I'll get you the part numbers for the central part when I get home this evening.

I am planning on getting a custom stainless one made at some point as the welded part isn't holding up too well so far.

Row spec 300tdi exhaust is available, from memory the down pipe is the same.
Middle and rear are part numbers -
ESR4526
ESR4527
If we are talking about a 90 that is?
I have just built a 200tdi 90 with td5 rear tank and made the above work.