Chassis paint quantity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Griffdowg

New Member
Posts
7,194
Location
Somewhere in Bristol
Been reading around here there and everywhere regarding paint/waxoil etc.

Decided to coat my chassis with POR 15 1st followed by chassis black paint with Waxoil to be squirted inside (mixed with a little engine oil).

Anyway, How much would one need to fully coat a 90 chassis?

Cheers,

G
 
Been reading around here there and everywhere regarding paint/waxoil etc.

Decided to coat my chassis with POR 15 1st followed by chassis black paint with Waxoil to be squirted inside (mixed with a little engine oil).

Anyway, How much would one need to fully coat a 90 chassis?

Cheers,

G
i painted mine by hand having cleaned it, coated with hammerite rust converter primed with red oxide and topped with nuspeed repaint used about litre of topcoat and litre of primer
 
A litre of each? That doesnt sound much, but keeps the £££ down! Cheers Jim. How many coats of each did you apply? just the 1 I assume as its only 1litre.

G
got two coats from the top coat and one thick coat from the primer, do you know a chap called chris from banwell who owns a 90
my chassis is now post office red by the way:)
 
Last edited:
Been reading around here there and everywhere regarding paint/waxoil etc.

Decided to coat my chassis with POR 15 1st followed by chassis black paint with Waxoil to be squirted inside (mixed with a little engine oil).

Anyway, How much would one need to fully coat a 90 chassis?

Cheers,

G
It will look really nice! BUT exterior rust is nothing compared to what you cant see!!!.......suggest hosing out :mad: every orifice /drying/& spraying a very thin [non viscous] rust inhibitor [eg: Dinitrol] that will soak into the rust that WILL be there but you cannotsee!..any other suggestions???
 
Back
Top