Centre cubby front trim piece

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Rob Dublin

Active Member
Posts
118
Location
Ireland
Is the front trim on the cubby hole removeable? The part that stops your change from falling everywhere. Don't want to pull it hard and break it. Looked on Rave but can only find clock replacement.

Ta in advance
 
do you mean this part? number 4?
 

Attachments

  • 4235.jpg
    4235.jpg
    23.6 KB · Views: 113
Just the very front facia section of part 4, the inch wide strip that extends from underneath the clock to the far side of the cubby hole. It's missing on my own one so it clearly comes off but don't want to be ham fisted about pulling it off.
 
Bit of a bum steer there, pulled the panel (reasonably hard) and heard a snap. On closer inspection there is some sort of T-shaped plastic tang at the back that holds it in place which I've now snapped.

No biggie, bit of silicone and it'll be fine. For anyone else I'd suggest taking off the dash panel and accessing it from the rear.
 
You're not the first and I'm sure you won't be the last. I needed a spare as I wanted to temporarily mount my ipod there. Every one I found in my breakers had been broken and glued back in.
 
I think there's a glob of adhesive just above the temp sensor they apply in the factory. In the exact same position in both.
 
Back
Top