can anyone help me?

would any of you happen to have a spare droparm knocking about?

Do you mean the thingy off the steering box?? If so yes.....but its attached to a steering box and if ya think I'm shifting it

Sirus said:

Do you mean the thingy off the steering box?? If so yes.....but its attached to a steering box and if ya think I'm shifting it

Click to expand...

I might have one. I'll have to check Sirus's store cupboard.

ere Si - yu bringing the Sankey down with ya - to carry all my bits?

yup thats the bit i'm after sirus'is the box it's attatched to a good'n if so how many beer tokens would you like for it?

i got to cut mine orf to replace the bottom oil seal for the mot.

yep I got one and its not on a box either but am not 100% its from a disco but you's can ave a looks if ya likes

Well as I said its stuck fast.... Have a look at toxicsox's un see if its the one

toxic is yours the same as the one buster cut off in his droparm ball joint replacement thread if so then it's the same as mine?

I'll av a quick shuffty
brb

nope mines dif to that so dunno what its come off
but why cut it off why not just use a puller to get it off
last time I took mine off I made a jig to hold my enerpack against it
it only took 2830psi of hydrolic pressure then bang and it flew off !!!!!
Left a dint in me drive though opps !!!!!

been trying that all day with iannotts and we couldnt budge it even with a three foot bar the wind the puller bolt in'it just deformed the puller and it was a proper heavy duty job too.

well I used an enerpack rather than a puller just made a jig to hold it in place but must admit first jig snapped two 14mm bolts clean in 2 trying to get it to shift but mk2 jig worked but likes I said made a bloody good dint in concrete drive.

So sorry I can't be of n e more help cos don't thing this spare drop arm gonna fit yours cos it is diff to one in busters photo's but if you can post a pic of yours ya never know

mines exactly the same as the one in buster's thread,cheer's anyway,somone else might have one but peeps is busy fighting off this lruk invaision.

halo said:

mines exactly the same as the one in buster's thread,cheer's anyway,somone else might have one but peeps is busy fighting off this lruk invaision.

Click to expand...

I had to use a 12 ton puller and a sledge hammer to shift mine when I changed it. I'll have a look for my old one for you. If I still have it you'll need to fit a new ball joint kit to it.

cheers ratty a new ball joint kit's not a prob,12t puller is