caliper problems

clemo2k1 · Oct 12, 2008

when i replaced the pads on my 300 tdi the pistons were realy tight to wind in on one side had to put the caliper in a vice now the car pulls towards the dodgy caliper under breaking. would new pistons and seals and a good clean out of the caliper sort the problem

discool · Oct 12, 2008

Corrosion on the pistons that is lifting the chrome plating so they are sticking
the permanent fix is to replace the piston or fit a peplacement caliper s/h or new.

caliper problems

clemo2k1

Member

discool

Well-Known Member

Similar threads