Bubbling exterior black trim L322

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

pda

New Member
Posts
70
Location
Worcester
Hi All,

Has anyone found any rust bubbles under the black painted exterior trim above the wing mirror on a L322. I have recently found a bubble and wondered if Land Rover have a warranty that covers this. I know Mercs have a 10 year warranty against rust.
PDA
 
I may be way off here, but I thought L322 panels etc were aluminium not steel? (which would obviously rule out any possibility of rust)

Awaiting being shot down for being wrong....
 
Voguely said:
I may be way off here, but I thought L322 panels etc were aluminium not steel? (which would obviously rule out any possibility of rust)

Awaiting being shot down for being wrong....
Click to expand...

I think he is revering to the window trim, yes the main panels are aluminium but the window trim is steel.

Matt
 
Yes it's the mat finished black trim around the windows but specifically just above the wing mirror. The car is nearly 7 years old so the warranty would have ran out then. Has anyone tried to changed any of the trim?
PDA
 
I have just purchase the weather strips that go between the window and the door because they have started to bubble on the 2 rear doors and the passenger front door, they have cost me about £35 each, which seems a rip off but they have made the RR look tatty, I am fitting them next week.

Just a thought but if you can get these trims off from where your wing mirrors are, you should be able to get them covered, there are places that basically shrink wrap a plastic coating over them, but your problem is going to be removing them.

.....................Adam
 
swast4 said:
I have just purchase the weather strips that go between the window and the door because they have started to bubble on the 2 rear doors and the passenger front door, they have cost me about £35 each, which seems a rip off but they have made the RR look tatty, I am fitting them next week.

Just a thought but if you can get these trims off from where your wing mirrors are, you should be able to get them covered, there are places that basically shrink wrap a plastic coating over them, but your problem is going to be removing them.

.....................Adam
Click to expand...

Hi Adam

Where did u get them from, do you have the part numbers?

Thanks
Matt
 
i got the same problem on mine and its still within the six year period, the dealer took loads of pics and sent them down to landrover to the claims department. the reply was that only the main body panels are gaurenteed not any of the trim, i even threatened to go down there with it but they said its a secure unit and wouldnt get in. load of arses down there that just pass the buck and wont even consider a good will gesture.:mad:
 
arron beast unleashed said:
i got the same problem on mine and its still within the six year period, the dealer took loads of pics and sent them down to landrover to the claims department. the reply was that only the main body panels are gaurenteed not any of the trim, i even threatened to go down there with it but they said its a secure unit and wouldnt get in. load of arses down there that just pass the buck and wont even consider a good will gesture.:mad:
Click to expand...

Fill the fooker with fertiliser, sugar & diesel and suicide bomb the gates. It won't be a secure compound then :D
 
You must log in or register to reply here.

Similar threads

Blob
L322 Fixed! - P0046 - Where is the boost control solenoid?
Replies
17
Views
3K
Grrrrrr
Grrrrrr
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Blob
L322 (Not your usual) battery drain
Replies
7
Views
2K
Datatek
Datatek
S
L322 Audio issue
2 3
Replies
40
Views
5K
SteveLondon
S
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
456
xDParis64
xDParis64
Back
Top