bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Brake pedal box removal.
Quite an easy job this one.
Heres how ah did it
First ah removed the master cylinder and reservoir by undoing the two bolts holding them onto the servo and gently moved them out of the way as not to damage any pipes .
then taped a bag over the end (watch out for the big O ring) before removing the rubber hose and plastic bit from the servo
Once that was done, it was a case of undoing the bolts in the cab (nuts are fixed on the box) .
.. unclipping the brake light switch wires and the brake fluid wires
Then removing the box with servo
Thats it, job done
Quite an easy job this one.
Heres how ah did it
First ah removed the master cylinder and reservoir by undoing the two bolts holding them onto the servo and gently moved them out of the way as not to damage any pipes .
then taped a bag over the end (watch out for the big O ring) before removing the rubber hose and plastic bit from the servo
Once that was done, it was a case of undoing the bolts in the cab (nuts are fixed on the box) .
.. unclipping the brake light switch wires and the brake fluid wires
Then removing the box with servo
Thats it, job done
