Bodywork repairs.

Any suggestions on how to deal with this?
Whilst in a rush I drove it up and off some ramps.

second hand tubs used to be cheap and new sills arent dear, it would straighten some but will never look like it hasnt been hit

Big hammer?

Looks like you are going to need a new rear tub
eBay is your best bet

Ouch!
Buy/ make some box section rock sliders and buy some panel beating dollys/hammers and a shrinking hammer and have a go at it

Bummer! New rock sliders and a sheet of ally checkerplate.( only joking about the checkerplate)
As a side note, there is no way i would go under that landy whilst it was up on those ramps, especially on grass.

Go for a new tub. Side panels are considerably more expensive (ask me how i know!)

Just been down to see my Landy after it's respray. I took it to a professional body shop. He has had to cut the old damaged sections where I drove it off the ramps. He originally thought he could beat it out but found the Alloy sides where too thin. So he cut out two sections. The pieces he has installed look to be a thicker gauge of Alloy. From what I could see you can't see it was damaged. He still has to put the bits back on like door handles etc. It should be ready by the end of the week. I will post some pictures then. I took some with my phone but they are crap.

Blimey, you dont rush things do you.lol

The picture says Rock Sliders to me.

SpaceDawg said:

The picture says Rock Sliders to me.

Click to expand...

Says " Idiot reversing "to me.

It's back. Only took them 12 weeks to do the respray. Then I had to go down there yesterday and explode at them. Anyway considering the state it was in they didn't do a bad job. 2000 Euro. Oh, don't all rush, he never wants to see a Land Rover ever again. He said it was a pig to work on.

Looks very tidy, like it. And looks better without the drain pipe on the wing

May have taken a while, but that is a nice looking job!

Wimblowdriver said:

Looks very tidy, like it. And looks better without the drain pipe on the wing

Click to expand...

Yes, I'm not sure about the snorkel either, or Chimney as my wife calls it.. I have no intention of driving it through water so thought I would leave it off for the time being. Plu s I'm sure my MPG dropped when I put it on.

mikescuba said:

Yes, I'm not sure about the snorkel either, or Chimney as my wife calls it.. I have no intention of driving it through water so thought I would leave it off for the time being. PluView attachment 98518 s I'm sure my MPG dropped when I put it on.

Click to expand...

Reckon it looks lots better without, just a personal opinion.

Never had one on any of my landies, I would be backing up and going another way long before standard wading depth!

Turboman said:

Reckon it looks lots better without, just a personal opinion.

Never had one on any of my landies, I would be backing up and going another way long before standard wading depth!

Click to expand...

I had one not for wading but to catch cleaner dust free air when on a Morocco trip. Well that was the theory, but to be honest the dust was everywhere. Go to 5.35 on the timer on the video:

mikescuba said:

I had one not for wading but to catch cleaner dust free air when on a Morocco trip. Well that was the theory, but to be honest the dust was everywhere. Go to 5.35 on the timer on the video:

Click to expand...

Not too different to going up our lane in the summer! I just change the air filter twice a year.