body trimming

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
thanks, its just on the wheel fitment guide it said i need to trim front and rear fenders, adjust steering bolts and was just looking for a gentle nudge in the right direction
 
thanks, its just on the wheel fitment guide it said i need to trim front and rear fenders, adjust steering bolts and was just looking for a gentle nudge in the right direction

this is right, you will also need to cut a little off the plastic sill trim . all depends if your running a/t or m/t. if your fitting sumit like insa st, then this is a must, as it will rip ya archs when offroad or going over a heavy bump.
 
This is a pic of the rear arch that I cut on mine

a2f85906.jpg
 
in the first post you wrote they were 265 :confused: now your saying there 235:confused: you dont need to cut for 235 ...

They're 235/85s, it will require some trimming as they are still taller than standard. I think they're a similar height to 265/75s

Foz
 
thanks guys, im gonna chop tomorrow afternoon, they catch on my radius arms and abit on the lower rear fender, i dont think ill be as extreme as your half car cut but it does look tidy, i said they were 265 as thats what i was told when i bought them, i started reasearch before i saw them but yes they are a simillar size to the 265's. again thanks guys much appriciated. :D
 
Back
Top