Body Lift Fitted

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
N

newson

Active Member
Posts
137
Finished fitting my body lift, thought I'd put some pics up as bored and got nothing better to do. :doh:
SAM_0417.jpg

SAM_0413.jpg

SAM_0421.jpg

SAM_0423.jpg
 
Looks good - wot tyres, how many inches body lift and wot suspension mods do you have?
 
I've fitted one of those body lifts to a mates Jimny... was easy and as its a jimny there isnt many options around on lifting the vehicle..

but on a disco...not sure about it, specially having suck a small base on the spacers..
 
it doesnt rub. Well lots of people have fitted the body kits but your entitled to your opinion. The body only sits on mounts the same size so I cant see any different. And no infact it drives spot on. Cant tell any difference to when it had its standard suspension and wheels.
 
[JP];1341923 said:
I've fitted one of those body lifts to a mates Jimny... was easy and as its a jimny there isnt many options around on lifting the vehicle..



but on a disco...not sure about it, specially having suck a small base on the spacers..
Click to expand...


Theres quite a few suspension kits for em, helped my mate fit a 3" lift kit to his.
 
hammoj28 said:
Theres quite a few suspension kits for em, helped my mate fit a 3" lift kit to his.
Click to expand...

consisted of what?

my mate already had a 2" lift (I think)... and then got the body spacers..
was easy to fit though, undo all the body mounts, jacks between body and chassi.. up and down in one go, job done :D
 
IMG_0434.jpg


my discovery with +2 sus and +2 body on 265/75R16 insa turbo special tracks

want to do something with the gap around the front bumper but as its a winch bumper not touching the bumper



we have the same kit i think?


get your front bumper on and more pics :)


mine also handles fine


made no difference
 
nice, have you not lifted your bumpers:? I made spacers for the back but think I will put a new one on the front probably homemade
 
not wanting to move the winch bumper as i pull myself out of some **** and changing it would weaken it (leverage)

my rear end articulates pretty well so wanting more room and my side exit exhaust is going over the chassis :)
 
You must log in or register to reply here.

Similar threads

R
Garage lift options and lift safety
2
Replies
20
Views
2K
Ian M in France
Ian M in France
1988smithy
Door i.d
Replies
2
Views
191
1988smithy
1988smithy
MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
1K
MAF Diver
MAF Diver
A
Help D3 Suspension
Replies
3
Views
635
Andrew bibby
A
R
Freelander2 boot handle broken.
Replies
2
Views
560
Hippo
Hippo
Back
Top