Bellhousing bolts

In the middle of doing me clutch, I came to undoing the bolts on the bell housing and I was wondering if at 12 o clock there is a bolt there, as it seems there is one but without a head! before trying to drill it out and what not I want to make sure this is in fact a sheered bolt? Thanks

should be studs with nuts aprt from bottom

no thay are for lining the gearbox up thay are studs on the engine for relocating the box

lanny man 90 said:

no thay are for lining the gearbox up thay are studs on the engine for relocating the box

Click to expand...

Ah thanks Lanny Man! Saved me crying like a baby I hate drilling and tapping!

jamesmartin said:

should be studs with nuts aprt from bottom

Click to expand...

Yup just pulled the engine forward and I have two I have noticed? one at 12 one at 6

lam not sure exactly what we are talking about but engine fly wheel housing has 4 x 10 mm bolts ar bottom 9 x 10 mm stud 2 x dowel ,and often tp stud nut left off as is tricky