Bearmach v Britpart

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hippolover

hippolover

New Member
Posts
672
Location
Perthshire
I kind of know what the answer will be having read other threads but has anyone an opinion on the quality of the balljoints on the ends of the main track rod (P38) of either company's part? I need to do back discs and ARB links too and am leaning towards Bearmach. Local supplier has the Bearmach in stock and the cheaper Britpart is mail order. (Obvious choice really).
 
bearmach branded can be as hit and miss as britpart imo.. maybe slightly better

go oem if it's not much more
 
jamesmartin said:
not in all parts both sell oem ,genuine or pattern or branded, same as tesco or asda
Click to expand...

what's the difference between oem and genuine?

should they be the same part but genuine in a landrover box and stamped?

i've had oem recently where they look nothing like the genuine parts i've replaced and are also unbranded. (300tdi reverse switch and 300tdi rear crank oil seal).

I understand oem can be from various factories that supplied landrover in the past.
 
if you order genuine then it will have been purchased from lr ,not necessarily lr boxed but usually ,oem from the same company not necessarily same quality but with timken you would ,obviously depends on your retailer how honest he is ,if its a non current part it probably isnt necessarily made in the same factory or country
 
jamesmartin said:
if you order genuine then it will have been purchased from lr ,not necessarily lr boxed but usually ,oem from the same company not necessarily same quality but with timken you would ,obviously depends on your retailer how honest he is ,if its a non current part it probably isnt necessarily made in the same factory or country
Click to expand...

ah right, so depending on the oem company the quality can still be a little hit and miss.

nothing is simple when you want cheap ;)
 
trax said:
ah right, so depending on the oem company the quality can still be a little hit and miss.

nothing is simple when you want cheap ;)
Click to expand...

yes .obviously better than pattern though, a good supplier should make an order up using the best priced parts and quality from several wholesalers ,ie timkem bearings from britpart ,seal from allmakes stub axle from bearmach
 
Yes but where do LR scource THEIR spares from, once the part is obsolete & all the original stock is exhausted? There cases (from reliable scources) pointing to parts bought from LR these days not being quality items, despite the premium price.
 
All manufacturers have always had very high spare part prices. You at one time could get the likes of Quinten Hazel bits that were cheaper but just as good as the genuine parts. Now all parts seem to be crap and a bit of a lottery to be honest.
 
SteNova said:
it would be nice if we had a breakdown of who makes the oem bits
Click to expand...

Land rover will have sourced there bits from several different manufacturers over time. For instance Bosal who many say now make crap exhausts, were actually OEM makers for many Land rover models.
 
You must log in or register to reply here.

Similar threads

D90 Td5
Aftermarket Hubs
Replies
3
Views
374
D90 Td5
D90 Td5
G
Britpart products
Replies
13
Views
2K
miktdish
miktdish
new to all this
Discovery 2 1999 ES for sale East Sussex
Replies
17
Views
3K
new to all this
new to all this
pwood999
Freelander 1 Faint scraping noise when turning left slowly
Replies
9
Views
1K
Dippypud
Dippypud
U
Disco 2 Knocking from rear drivers side?
Replies
7
Views
1K
JUKE179r
JUKE179r
Back
Top