Back end skipping

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Just fitted a lift with no caster correction arms or cranked trailing arms.
The problem is the back end skips as you go around any corner, slow or fast

I think you'll find I did.
 
jamesmartin said:
all trucks are different as all suspension set ups condition of roads,speed of cornering whats slow for one person fast fot another,im not saying particulary that its that ,but its not unknown ,and ive experienced it on several occasions ehere people have fitted hd springs and thats been the cause,the 1st post didnt give that much away as they often dont,and if just occurred after what seemed to me like fitting a set of high lift h/d springs but wasnt as turned out a reasonable guess i would have thought,i ve a set of h/d britpart yellow springs firm and disco really handles well to the point that you can control back end sliding without roll ,you also have to bear in mind that i seen/worked/fitted considerable numbers of landies so may have seen experienced many different faults or symptoms than you ,when people say for instance britpart yellow springs are crap and youve fitted hundreds without problems who would i believe my experience or you lot ?,could well be another problem like the fellow who left his caliper bolt loose and caliper started jamming wheel forwards but okay in reverse id have to write a book the size of a manual to cover all possibilities ,i will gladly point out any stupid posts you make if you want me to but normally let things go as its good for everybody to chip in an idea however odd as helps everybody learn and sometimes it is stupid answer
Click to expand...



And here endeth todays sermon. :hysterically_laughi:hysterically_laughi

I'll give you one thing mate, you do like to get involved. :D
 
Suris said:
I have never before come accross someone as void of humour as you mate.
You do need to chill out a bit. :D:D
Click to expand...
bollocks i have a good sense of humour as any that have met me can vouch ,your allways tryinto push for a response from me,probably to do with inferiority complex,nigbo is funny your not
 
jamesmartin said:
what do you mean by that ,he speaks for all members ,he owns it ,hes made most posts ,or speaks for those with no mechanical knowledge like you and him,
Click to expand...

i would rather know my limitations than be a fookin no it all like yerself, get a fookin life dickhead
 
You must log in or register to reply here.

Similar threads

andyjack
Help with suspension
Replies
3
Views
204
miktdish
miktdish
H
MOT Failed
Replies
3
Views
444
Datatek
Datatek
C
Starting to custom 2015110
Replies
5
Views
473
300bhp/ton
300bhp/ton
overdrawn
New shocks affecting steering
Replies
4
Views
423
overdrawn
overdrawn
S
end float on bronze bush
Replies
2
Views
313
tottot
tottot
Back
Top