Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Morning Gary....
Put a good dose of Castrol EP2 on the linkage with a brush. Could have used Silicone grease I suppose
I should imagine Ceramic grease would be ok,... any good grease is better than none at all !!
The temperature of the fluid was approx. 34 deg after the run when I rechecked the oil level.
Checked the DTC's for all the systems and none reported
Put a good dose of Castrol EP2 on the linkage with a brush. Could have used Silicone grease I suppose
I should imagine Ceramic grease would be ok,... any good grease is better than none at all !!
The temperature of the fluid was approx. 34 deg after the run when I rechecked the oil level.
Checked the DTC's for all the systems and none reported
