Assisted beam

Hi guys ,have a question coz I am new at Disco's...so I have a 14 reg Dosco4 HSE and it seems to me that the high beams assist it is not working even if the selector is on AUTO...
any help please

Any use?
https://www.ownerinfo.landrover.com/document/LS/2016/T19947/18742_en_GBR/proc/G1841950

Shimsteriom said:

Any use?
https://www.ownerinfo.landrover.com/document/LS/2016/T19947/18742_en_GBR/proc/G1841950

Click to expand...

Thanks Shimsterion,I've tried this but it showing Disco's after 2016....

Shimsteriom said:

Any use?
https://www.ownerinfo.landrover.com/document/LS/2016/T19947/18742_en_GBR/proc/G1841950

Click to expand...

Thanks for the link! I've tried everything there but I've never seen the "green AUTO" light ON.....otherwise the light selector is on AUTO MODE, headlamps are selected on low beam,but nothing changes....

Sorry, I missed the 14 reg bit in your original post.

You may have to wait until the sensible people (that have now gone to bed) wake up and offer some advice.

Shimsteriom said:

Sorry, I missed the 14 reg bit in your original post.

You may have to wait until the sensible people (that have now gone to bed) wake up and offer some advice.

Click to expand...

Thank you anyway

It might be an obvious suggestion, but have you read the owners manual & also checked the relevant fuse?

Pawl said:

It might be an obvious suggestion, but have you read the owners manual & also checked the relevant fuse?

Click to expand...

Or is that function actually activated on this model?

Pawl said:

It might be an obvious suggestion, but have you read the owners manual & also checked the relevant fuse?

Click to expand...

I've read and followed all the instructions on the manual but nothing.....don't know what fuse to check.....Thanks

Nodge68 said:

Or is that function actually activated on this model?

Click to expand...

In the manual it says it exists on my model....thanks mate, I will check the fuse box