Anyone got a gash deepender door card kicking about?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Trewey

Trewey

Cockernee, Pasty munchin bastid.
Posts
20,091
Location
Kernow - Near England
I just need a section out of one, big enough to cut 2 circular blanking plates to cover over where the window winders would come through.
I've replaced me doors wiv ones wiv leccy winders but used me orijinal door cards. Now I've got 2 oles ter cover up.

If anyone can elp, i'd be grateful.:)
 
tre,

you could also pop a pair of "tweaters" in there to in-hance your stare-eeeeeooooooowwwww...

screw the door cards, its gonna cost yer $$$ in the end. cant you use a blanking plug of sum sort?

G
 
Fibreglass over the holes, and re-vinyal them....:)

That's what I have done with mine, and they look lurvey.

Use some heavy duty spray glue, and a hot air gun to mould the material around the door cards.

:D

Oh, key the area well before glassing- as the bugger don't like sticking to door cards!
 
Sod off it's mine all mine. But I have got an owld door card if yer want me to cut some oles out of it for yer, it'll be easier to post oles than the whole card. Let us know wot size you want an I'll see if theres enough undamaged to get em in, or out as the case may be.
 
You must log in or register to reply here.

Similar threads

1988smithy
Door i.d
Replies
2
Views
533
1988smithy
1988smithy
M
L322 rear door card wiring
Replies
7
Views
2K
Datatek
Datatek
Andy Warren
Front door card removal 01 TD5
Replies
10
Views
3K
Stanleysteamer
Stanleysteamer
A
110 Utility - Rear passenger door not locking/opening
Replies
0
Views
474
adrian996
A
E
2002 Freelander 1 Door Card Clips
Replies
17
Views
1K
Hippo
Hippo
Back
Top