any one tried one of these ?
- Thread starter pete@her
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
Engine management things?
langley
New Member
- Posts
- 372
- Location
- Bristol UK
If its an obd reader it wont work on a p38
langley
New Member
- Posts
- 372
- Location
- Bristol UK
The unit is not able to communicate with the vehicle due to the landrover use of bespoke proticals.
You will need: nanocom, faultmate, bearmach hawkeye or the new lynx made by britpart.
Safe to say you will need around ! £300+ to get one...
You will need: nanocom, faultmate, bearmach hawkeye or the new lynx made by britpart.
Safe to say you will need around ! £300+ to get one...
- Posts
- 16,475
You will get minor information from an OBD protocol on the petrol P38's Engine ECU as these were EODB compliant...but the Diesel uses proprietary Bosch Protocols...and the rest of the P38 systems are LR protocols only!
Mike v.t.s
Active Member
- Posts
- 475
- Location
- Chorley, lancashire
A bloody good 1 that I use is AUTODIAGNOS that can reprogram and set setting for alarm daytime running lights etc etc,
cheongthong
Active Member
- Posts
- 214
- Location
- belgium
hihi nice to hear about this 
stjohnsmythe
Active Member
- Posts
- 474
Mike v.t.s
Active Member
- Posts
- 475
- Location
- Chorley, lancashire
Just looked up the price of one
Yeh don't get me wrong there soddin expensive but I use it on all cars in my trade so it pays for itself (1 day I hope) but it can do EVERYTHING that the Landrover dealers can do.
sas1810
New Member
- Posts
- 1,347
- Location
- back in Willenhall, West Midlands.
Nanocom does the daytime lights as well. And can you can change the alarm settings too.
