Disco 2 Alarm 16-07

Alarm 16-07
Front Left Sensor Output Too Low
Intermittent 016 Times

Any advice on how to check the sensor before I buy a new one ?
Are they easy to remove.
Also what does the sensor do ?

Thanks

The ultrasonic movement sensor isn’t monitored, just like the door contacts, how do u come by with those numbers. ?

Taza said:

Alarm 16-07
Front Left Sensor Output Too Low
Intermittent 016 Times

Any advice on how to check the sensor before I buy a new one ?
Are they easy to remove.
Also what does the sensor do ?

Thanks

Click to expand...

"Front Left Sensor Output Too Low" would tend to suggest a problem developing with the speed sensor on the front nearside wheel. It might be due to the sensor itself having been disturbed and consequently not sitting in its correct position or a fault starting in the plug and wiring.
The first things to check, after clearing the historic faults would be that the sensor is securely in place and then that the plug where the sensor lead connects to the vehicle wiring is clean.
Then take the vehicle for a short drive and recheck the codes. The action of unplugging and reconnecting the sensor wiring might even clear the faults, if you're lucky.
These sensors send a signal proportional to each wheel speed to the SLABS ECU which allow "electronic decisions" to be made by the ECU about engaging ABS, Traction control or hill descent control, as required.
What, if any dashboard lights do you have showing?

Taza said:

Alarm 16-07

Click to expand...

First of all what diagnostic tool did you use and which system was scanned? ... was this the exact description of the code you've got?

Guys
Nano Tool and in the SLABS
Yes that was the full error code

Do you have the 3 amigos on?