breeze1957
Member
- Posts
- 18
Hi and good morning to all members,took airbag ecu off my 2005 td4 two days ago to send for reset as car is having airbags replaced after a light front end knock,didn't try to start until today and now find it won't rev above 2500 or so and a right hand engine symbol illuminates,it ran perfectly before ecu removal ,does anyone know if this is the cause, I just think its to much of a coincidence to be anything else as it had not been started since,thanks in anticipation of replies
put 2 gallon of diesel in today as it looked a bit low,started first go but would only rev to 3500 then the r/h engine light would come on so turned off to try again,now it won't start at all,cranks over well and tried to catch once,i'm thinking it could be pump as i cant hear anything or blocked fuel filter,anyone got any ideas basic tests etc thanks
put 2 gallon of diesel in today as it looked a bit low,started first go but would only rev to 3500 then the r/h engine light would come on so turned off to try again,now it won't start at all,cranks over well and tried to catch once,i'm thinking it could be pump as i cant hear anything or blocked fuel filter,anyone got any ideas basic tests etc thanks
Last edited: