P38A Air suspension low on drivers side

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

BigAd

Active Member
Posts
72
Location
Leeds
Well I'm lost so I'm hoping I can shed some light on my issue here.
I've recently had 4 new bags put on my p38 2 arnott on the front and 2 dunlop on the back as the rear arnotts I had put on both failed by the top clip with the bag parting causing a major leak.
I got the car back today and when I turned it on it inflated to standard height with a solid light by the switch but outside it has seemed to inflate fine on the near side but the drivers side is way too low, I measured this and the passenger side was 89cm from the floor to the wheel arch, however the drivers side was 84cm on both wheels.

Surely this cant be the bags as they are brand new and I'm thinking it just needs calibrating but I may be wrong. If so does anyone know someone that does calibration in yorkshire.
 
Hi if you have a windows lap top contact @Datatek on here and he can sort you out with a lead and software to do all the EAS stuff for a lot lot less than a garage will charge thats if you can find one how will do it.

@Grrrrrr some more arnotts going bad:( sounds like the same problem you had.
 
Well I'm lost so I'm hoping I can shed some light on my issue here.
I've recently had 4 new bags put on my p38 2 arnott on the front and 2 dunlop on the back as the rear arnotts I had put on both failed by the top clip with the bag parting causing a major leak.
I got the car back today and when I turned it on it inflated to standard height with a solid light by the switch but outside it has seemed to inflate fine on the near side but the drivers side is way too low, I measured this and the passenger side was 89cm from the floor to the wheel arch, however the drivers side was 84cm on both wheels.

Surely this cant be the bags as they are brand new and I'm thinking it just needs calibrating but I may be wrong. If so does anyone know someone that does calibration in yorkshire.
Calibration is easy if a little tile consuming with the RSW EAS software.
Does the car drop when left overnight?
 
Well I'm lost so I'm hoping I can shed some light on my issue here.
I've recently had 4 new bags put on my p38 2 arnott on the front and 2 dunlop on the back as the rear arnotts I had put on both failed by the top clip with the bag parting causing a major leak.
I got the car back today and when I turned it on it inflated to standard height with a solid light by the switch but outside it has seemed to inflate fine on the near side but the drivers side is way too low, I measured this and the passenger side was 89cm from the floor to the wheel arch, however the drivers side was 84cm on both wheels.

Surely this cant be the bags as they are brand new and I'm thinking it just needs calibrating but I may be wrong. If so does anyone know someone that does calibration in yorkshire.

Sounds like my rears. Failed when parked up on the flat?

Have you rung Arnott Europe? I spoke to Tom last week. Not heard anything back yet.
 
Hi if you have a windows lap top contact @Datatek on here and he can sort you out with a lead and software to do all the EAS stuff for a lot lot less than a garage will charge thats if you can find one how will do it.

@Grrrrrr some more arnotts going bad:( sounds like the same problem you had.

Yes, still waiting on Arnott to resolve mine. Running with an old Dunlop one at the moment.
 
Back
Top