actuator front os

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
disco95

disco95

New Member
Posts
117
Location
scotland
my 300tdi 1995 disco drivers door when opening and closing actuator makes continous clicking noise like a machine gun. still locks and unlocks door, told by a mechanic that if changed need to reprogramme as it a master to all other doors, is this true, if so where do i get one and who reprog. or if not can antone advise where to get one. have taken door card off and tried to adjust but makes no diffrence.:confused:
 
all seems ok looks like actuator has fault is there any truth that if replaced need to reprog. new one so it works all central locking and alarm system
 
discool said:
No programming required. You can get a master actuator to replace your faulty on at Maplin although you will have to cut and rejoin wires.
Click to expand...
thanks for the help, take it maplin will know what to supply if i ask for a master actuator or do i need some sort of part no.:confused:
 
5w w = wire 2 wire are slaves which all the other doors are the master also has electrical contacts, the Maplin page also has more info on the wiring circuit.
BUT if you have the door card off try moving the operating rod with your finger at the same time as pressing the fob button, if it all works the ok then it's just a slight adjustment required of the actuator mounting, only a few mmetre so undo the mounting screws and move slightly. May work.
 
Last edited:
You must log in or register to reply here.

Similar threads

Maat
P38A Driver's door lock issues
Replies
12
Views
951
Datatek
Datatek
O
Front passenger door on Freelander 2 won’t open
Replies
2
Views
680
Arctic2
Arctic2
Landylady666
Front passenger door on Disco 4 not unlocking with key fob
2
Replies
33
Views
4K
gstuart
gstuart
C
Disco 2 Central locking diagnosis help?
Replies
3
Views
1K
sierrafery
sierrafery
Kevlandau
Defender Door lock
Replies
19
Views
3K
Kevlandau
Kevlandau
Back
Top