ABS Modulator noise

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
U

uk03065

Member
Posts
19
Can someone throw any light on this issue
Range Rover P38 DHSE 2002
Abs Modulator SXC 1000000
My modulator starts making a clunking noise when I am braking very lightly, if I press the brakes harder the noise stops.
I have cleaned out the reservoir which wasn't really dirty and renewed the fluid to no avail. Replaced accumulator to no avail.
Thanks for any help/ideas
 
there are plastic washer in earlier models that fail, your one has steel washers I believe.

when I bough my repair kit off ozzie guy if I remember correctly there are two parts to a pin assembly and if they get contaminated and scratched you get this effect/as well as plastic washer.

I would see if washer kit available google "range rover brake modulator repair kit"
 
thanks, done some research on the older type which can fail, as mine is the later type can these fail or can I just put up with the noise
 
uk03065 said:
Can someone throw any light on this issue
Range Rover P38 DHSE 2002
Abs Modulator SXC 1000000
My modulator starts making a clunking noise when I am braking very lightly, if I press the brakes harder the noise stops.
I have cleaned out the reservoir which wasn't really dirty and renewed the fluid to no avail. Replaced accumulator to no avail.
Thanks for any help/ideas
Click to expand...
I trust you bled the system according to the proceedure in RAVE? If not there will be air in the modulator.
 
well have bled the system 3 times (to the manual)
still get the clicking noise when lightly pressing brake pedal, if I press hard it disappears.
Anyway got a second hand modulator, anything I need to be aware of when swapping them over?

Thanks
 
uk03065 said:
well have bled the system 3 times (to the manual)
still get the clicking noise when lightly pressing brake pedal, if I press hard it disappears.
Anyway got a second hand modulator, anything I need to be aware of when swapping them over?

Thanks
Click to expand...
Quite likely to be the pedal or pedal return spring not the modulator.
 
Well swapped out the modulator at weekend re bleed and it does exactly the same, quite an annoying ticking noise when lightly pressing the brake pedal, could it be the pressure switch on the pump?

any help appreciated
 
uk03065 said:
Well swapped out the modulator at weekend re bleed and it does exactly the same, quite an annoying ticking noise when lightly pressing the brake pedal, could it be the pressure switch on the pump?

any help appreciated
Click to expand...

It could be what you were told it could be at the beginning of this thread.
 
Hi Wammers

I have bled the system numerous times and brakes are good and firm pedal pressure, its just the annoying noise. do you think I still have air in the modulator?

Thanks
 
uk03065 said:
Hi Wammers

I have bled the system numerous times and brakes are good and firm pedal pressure, its just the annoying noise. do you think I still have air in the modulator?

Thanks
Click to expand...

Look in RAVE Manuals -> 70 Brakes-ABS -> Repair -> Brakes bleed system, pages 2 and 3. See Note in bold type at bottom of page 3.
 
Hi
Yeah ive read that but during the bleeding procedure I can hear the pump running and it is not making a ticking noise, its only when I am driving it does it, if I press the brakes to make the pump come on it doesn't make the noise I can hear, its definitely speed related as the tick/clunk slows as the car slows if you know what I mean.
 
uk03065 said:
Hi
Yeah ive read that but during the bleeding procedure I can hear the pump running and it is not making a ticking noise, its only when I am driving it does it, if I press the brakes to make the pump come on it doesn't make the noise I can hear, its definitely speed related as the tick/clunk slows as the car slows if you know what I mean.
Click to expand...

The ticking noise is from inside the modulator if there is air in it, it is the valves oscillating.
 
well I finally cured the noise, don't know why but I re bleed the system put mu old modulator back on all to no avail.

replaced the front pads (which were not worn out) and voila no noise.
 
You must log in or register to reply here.

Similar threads

MikeFl4
P38A ABS faults and codes
Replies
17
Views
3K
MikeFl4
MikeFl4
T
LR4 Front Driver Wheel Noise
Replies
14
Views
2K
gstuart
gstuart
MikeFl4
P38A ABS Fault and Traction failure from ignition II
3 4 5
Replies
87
Views
10K
Grrrrrr
Grrrrrr
N
P38 hard very occasional hard brake pedal ( hopefully cured ).
Replies
14
Views
2K
pete12345
pete12345
N
Help - 2.4 TDCI Brakes Problem
Replies
8
Views
2K
nickc
N
Back
Top