ABS Fault

Hi All
I’m getting these 3 faults
ABS is off line and also Stability control, hill decent and emergency braking.
I’ve tried clearing the faults and also recalibrating the sensors with my Autel MaxiAP200 app to no success. Keeps going to process failed .
Has anyone got any knowledge of these faults or even where to locate the sensors to check the wiring etc ?
2013 Freelander.

Looks like the vehicle dynamics module has failed, or is off line. I've no idea where it's located on the later models though.
It's integrated into the ABS module on the pre-2012 vehicles, so it could well be in the same location on the later vehicles too.

Nodge68 said:

Looks like the vehicle dynamics module has failed, or is off line. I've no idea where it's located on the later models though.
It's integrated into the ABS module on the pre-2012 vehicles, so it could well be in the same location on the later vehicles too.

Click to expand...

Thanks, I will look into that . I had the timing belt and water pump job done a few days before the faults appeared. The mechanic is adamant that’s it’s unrelated to the work he did though.

Welshy said:

Thanks, I will look into that . I had the timing belt and water pump job done a few days before the faults appeared. The mechanic is adamant that’s it’s unrelated to the work he did though.

Click to expand...

It should be unrelated, but it the timing is very close between the timing belt the brake issue appearing.