- Posts
- 2,092
- Location
- Mull of Kintyre
Been there done that lol but not keen on doing it with this lol
P38A ABS Accumulator
- Thread starter oakey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 31,488
- Location
- North Shropshire
Now i get posh ones like this with a nut on the end
- Posts
- 2,092
- Location
- Mull of Kintyre
Good idea
- Posts
- 18,970
- Location
- Buckinghamshire, UK. ('95 DT)
Shouldn't be that tight. Hand tight is more than enough to nip up the o-ring.
- Posts
- 31,488
- Location
- North Shropshire
Why they put them in such odd places I'll not figure out
Sort of counter sunk into the sump area
- Posts
- 18,970
- Location
- Buckinghamshire, UK. ('95 DT)
Afterthought.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Try putting some sandpaper/emery between the strap and the accumulator.
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
I have had three goes at getting mine off, lots of grunt, but no movement yet. Tomorrow is another day though 
- Posts
- 31,488
- Location
- North Shropshire
rude!!I have had three goes at getting mine off, lots of grunt
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Is your system fully depressurised?I have had three goes at getting mine off, lots of grunt, but no movement yet. Tomorrow is another day though
- Posts
- 2,092
- Location
- Mull of Kintyre
I am going to try sandpaper tomorrow and also rough up the strap a bit as it has been well used
- Posts
- 31,488
- Location
- North Shropshire
Threaten it with a rusty spoon, that should rough it up
- Posts
- 2,092
- Location
- Mull of Kintyre
Sorted
Put sandaper round the accumulator
Came off first time but was FT
Thanks for your help folks
Put sandaper round the accumulator
Came off first time but was FT
Thanks for your help folks
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
How did you go with the rest of the job? All done and working?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 18,970
- Location
- Buckinghamshire, UK. ('95 DT)
You can have another brownie point. Oddly enough, I do the same on my trolley jack handle to stop it rotating in its socket.
- Posts
- 2,092
- Location
- Mull of Kintyre
Yes all working perfectly now thanks
Next problem is cruise control but that will be another thread soon lol
Next problem is cruise control but that will be another thread soon lol
- Posts
- 31,488
- Location
- North Shropshire
That should be a quick fix with some new vac pipe
Similar threads
Freelander 1
Changing Gearbox Solenoid