Aaron's 90 rebuild (Round 2)
- Thread starter aaronmorris
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
I think you should paint the surrounds on the soon to be mine 90, satin black.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Cheers
Satin black matey!!
Yeah I think they need to be black, Just wasn't sure on satin or gloss.
Paint it all blue, grill and all
Noooooooo, Got to break it up abit
I think you should paint the surrounds on the soon to be mine 90, satin black.
Cheeky twunt
Satin black it is then
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
So this mornings first job was to temporarily fit the spats, Wanted to see what they look like standard non painted.
Decided they looked **** and took them off. More on this later.
[/URL][/IMG]
Went and picked an aircon grill panel up. I haven't got a panel at all and this was reasonably priced locally so thought I'd see what it looks like.
[/URL][/IMG]
Test fitted it and it sticks out ALOT further than I thought it would
May end up changing it for a standard one as I'm not reet sure about it.
On a plus note I could get a HUGE intercooler behind there
[/URL][/IMG]
Any way, Took it back of and prepped for paint and then wanged some colour on it
[/URL][/IMG]
As I was saying earlier about the spats. I thought they looked **** as standard so decided they need painting.
So seeing as I was painting me grill I thought I'd paint a spat up and see what they look like colour coded.
If I don't like it they'll go gloss black I think.
[/URL][/IMG]
Decided they looked **** and took them off. More on this later.
Went and picked an aircon grill panel up. I haven't got a panel at all and this was reasonably priced locally so thought I'd see what it looks like.
Test fitted it and it sticks out ALOT further than I thought it would
May end up changing it for a standard one as I'm not reet sure about it.
On a plus note I could get a HUGE intercooler behind there
Any way, Took it back of and prepped for paint and then wanged some colour on it
As I was saying earlier about the spats. I thought they looked **** as standard so decided they need painting.
So seeing as I was painting me grill I thought I'd paint a spat up and see what they look like colour coded.
If I don't like it they'll go gloss black I think.
Last edited:
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
Gloss black to much blue
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Yep, That's my thoughts, But I had the paint out so thought I'd give it a try. Only done one and prepped the rest for when I decide
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
Yep, That's my thoughts, But I had the paint out so thought I'd give it a try. Only done one and prepped the rest for when I decide
clean good with brake cleaner
Landyfox
Well-Known Member
- Posts
- 4,489
Looking great! I quite liked the look of the standard black spats.....but hay I'm old fashioned!
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Panel wipe a few times before I paint. Guess it's kind of similar.
To be honest looking at the pic now I like it like that.
But when it was in front of me I thought it looked ****.
Hayho, No going back now.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Nipped out and fitted spat.
Definitely going gloss black
[/URL][/IMG]
Definitely going gloss black
Landyfox
Well-Known Member
- Posts
- 4,489
Nipped out and fitted spat.
Definitely going gloss black
[/URL][/IMG]
Gloss black will look very nice.
Aaron did you order standard suspension dampers and springs.?! I need to replace mine but want to keep it standard hight. Was thinking of the OEM Armstrong set. If you don't mind me asking how much did you pay.?!
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
I'm using standard height Allmakes springs. (For not a lot of money.) But I've fitted a few sets of them and never had a problem. Will have a look and tell you an exact price if you want?
As for shocks as daft as it sounds I actually haven't fitted any yet. Cant decide weather to fit Armstrongs as you say or something like Bilstein's.
IamRobbie
Well-Known Member
- Posts
- 2,800
- Location
- Derbyshire, j28 M1
I've replaced my shocks all round with armstrong and haven't had any issues so far. Paid around £18 each from ebay i think....
- Posts
- 11,020
- Location
- North of the Wall
Aaron, do ma a favour mate and save me hunting through the 40 odd pages of your thread. Before you put your 2k epoxy primer on your radius arms, axles etc, did you use any form of rust converter?
Landyfox
Well-Known Member
- Posts
- 4,489
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Definitely going gloss black now mate
Cheers
And hold yer horses I haven't got that far yet Nope I just applied straight to clean metal. Although I used etch primer as that's what I had.
Epoxy does the same sort of thing but better
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Give that front grill a bit more time before changing it. It sort of goes with the bonnet, makes it look less bulbous.
