A problem with my nuts!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

PROJECT_DORA

New Member
Posts
52
Location
carmarthen, south wales
Just taken the manifold off Dora (300tdi_Disco) and after lots of swearing, bleeding and hammering,:mad: i finally took a power saw to the cat :doh: ( being replaced):) managed to get one nut off (cat to manifold) as a comparison, and (gently) hammered the turbo free :doh: after melting 3 out of 4 bolts :eek:(trusty oxy) BUT..... where can i get replacement's from? been around spares and parts dealers, no joy, even been to a few engineering places, but the can only offer cheap, make do items. sooo..... Anyone know where i can purchase 4 bolts for the turbo to manifold, and 3 nuts for the cat bypass, to the manifold?:confused::confused::confused:
 
Will have a look at mine tomorrow, think they are 'K' nuts possibly,
we use them for race wheel nuts in karting, mucho expensive, should be available from the likes of demon tweeks, etc......

Will update tomorrow once I've checked mine.
 
well, i've checked a few sites on tinterweb, i "THINK" i found the correct ones, but they come in pack's of 100 and not even sure if they are the correct ones. plus....100? thats serious overkill!
 
there only ordinary flange nuts, why remove turbo nuts,you only need to replace cat with 90/110 non cat down pipe ,turbo nuts are 8mm steel lock nuts instead of nylon lock nuts
 
You must log in or register to reply here.

Similar threads

Landy Lavin
Water pump fell off D4
Replies
15
Views
2K
lynall
L
Y
L322 td6 3.0l no start but dose crank
Replies
2
Views
2K
Artermis
A
P
Is it always like this ?
Replies
7
Views
419
Kev12
Kev12
thefrog
My Experience with Ethanol E85
Replies
1
Views
518
Freddie17
Freddie17
M
Faulty Throttle Body??
Replies
5
Views
654
mialoveland
M
Back
Top