Tilo
Member
- Posts
- 84
- Location
- Abu Dhabi, UAE
Hello again!
Took the tractor for MOT inspection and it failed over CO emissions.
Got 6.5 when the limit is 4.5.
Replaced the air mass meter and the air filter, drove it for about 30Km on high revs. Tested again today, it only came down by 0.3, so now 6.2. HC level is ok.
Any ideas before I start pulling the coin out of my pocket? I'm pouring some injector cleaner and fuel additive and drive back home again on high revs today but I don't expect to drop (that much) enough to pass...
Is this goodbye?
Took the tractor for MOT inspection and it failed over CO emissions.
Got 6.5 when the limit is 4.5.
Replaced the air mass meter and the air filter, drove it for about 30Km on high revs. Tested again today, it only came down by 0.3, so now 6.2. HC level is ok.
Any ideas before I start pulling the coin out of my pocket? I'm pouring some injector cleaner and fuel additive and drive back home again on high revs today but I don't expect to drop (that much) enough to pass...
Is this goodbye?