300tdi stopping problem

Phil_b

New Member

Posts

273

Location

North shropshire

• Aug 29, 2010

• #1

Hi got a major problem, my disco won't stop on the key, I have had to stall it everytime for the past few days was slightly intermittent for a few weeks but now it's a problem I don't want to shagger the box the clutch or the handbrake on the shaft, any troubleshooting from anyone would be hugely appreciated

 

Phil_b

New Member

Posts

273

Location

North shropshire

• Aug 29, 2010

• #2

Btw it's a replacement pump not ao long ago

 

D

Dent

New Member

Posts

1,051

Location

North shropshire

• Aug 29, 2010

• #3

Stop solenoid on pump ?

 

Phil_b

New Member

Posts

273

Location

North shropshire

• Aug 29, 2010

• #4

I was wondering that,
is it voltage to stop or negative to stop??? As I'll check the feed too

 

mark-d

Well-Known Member

Posts

1,107

Location

Netherlands

• Aug 29, 2010

• #5

there is voltage to the pump while its running and it should be taken away to stop it

 

Phil_b

New Member

Posts

273

Location

North shropshire

• Sep 9, 2010

• #6

Well it now stops, after clinched teeth everyone I stalled it awaiting a flying prop or something untoward
But I'm a little concerned at what I found
A few peices of metal plating or filings?? Time will tell, I'm wondering if this has come from the old solenoid and stopping it coming up
Bits on my trousers

Then the remainder on my magnetic friend

 

Last edited: Sep 9, 2010