300tdi replacement engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

juicehills

New Member
Posts
6
Location
Tarland, Aberdeenshire
Hi, This is my first post and I am looking for some opinions please.
I cooked my 1997 300tdi last week and I am torn between buying a second hand engine with 2 months warranty for £250+VAT and a choice of many but no idea of mileage etc. OR a reconditioned engine with 1 years unlimited mileage warranty for £995 inc VAT
The car is heavily modified and I spent a fair bit 6 months ago getting new sills, body mounts, brake calipers, Finnigans wax treatment etc, to name but a few.
Also, how difficult is this operation?
Thanks in anticipation
 
juicehills said:
Hi, This is my first post and I am looking for some opinions please.
I cooked my 1997 300tdi last week and I am torn between buying a second hand engine with 2 months warranty for £250+VAT and a choice of many but no idea of mileage etc. OR a reconditioned engine with 1 years unlimited mileage warranty for £995 inc VAT
The car is heavily modified and I spent a fair bit 6 months ago getting new sills, body mounts, brake calipers, Finnigans wax treatment etc, to name but a few.
Also, how difficult is this operation?
Thanks in anticipation
Click to expand...

£250 with 2 months warranty gets my vote.
 
andyb66 said:
Ratty, that is £250 plus VAT so getting closer to £300.

When you compare £ per month warrenty the full re-con engine is better value.

Does depend on depth of wallet in the end tho :)
Click to expand...

Not nessy-celery.;)

If the recon engine had a 3 year warranty I would say to go for that. 1 year on a recon is **** poor. :(

As you know yerself 300 tdis are pretty robust engines when looked after. If he stuck a £300 engine into his landy he can recoup his £300 by selling the old engine and all it's ancilleries. I bought my old 300tdi with a fecked engine. I made enough money when selling the engine off to cover the cost of the new engine, egr blanking kit and cambelt kit.:p:p:p

If you do a search online for 'independent warranty' you can take out a decent warranty (not like the **** ones when you buy a car but ones that actually cover things) on most cars for about £250 a year. Add £250 to £300 and you still get £450 left in your pocket + an engine with 12 month warranty.;):cool:
 
The answer is to buy an MOT failure disco for 500 quid or less. You can test the engine out properly before you remove it. Then sell the remains of the disco in bits. You should recover most of your 500 quid investment plus you've got the engine.
 
Thanks very much guys for all your input, I was thinking along similar lines but you have all added some interesting angles, like the independant warranty or MOT failure and your input is very much appreciated!
She may not be in her youth but I just love her to bits and we have some GRRRREAT fun together.

I'll let you all know how I get on.
 
depending how badly cooked your current engine is ........

you have an engine, you know its history, your gonna have to remove it if your thinking about replacing it - why not rebuild it? this obviously depends on how bad your current engine is but buying the parts 'should' come in cheaper than a replacement engine, rebuild time is similar to the time spent sourcing and fitting a replacement engine, and you gain the confidence that you know your engine is up to your standards. my first question when somebody is getting rid of something is 'why' and i would ask the exact same of a used engine.

your talking about replacing an engine so i presume you have a decent set of hammers (tools for the posh people) and you have some experience around the oily bits, so a rebuild should be pretty easy. if you struggle - haynes/mates/ask on here/someone local will surely help you.
 
Good thinkin from mark disco there. Or why not buy a cheapo 2nd hand engine and throw it in temporarily while you rebuild yours. You'll get back what you paid for it when you sell might even make a few quid on it.
 
Back again and thanks for all the advice.
I eventually came across a friend who had bought a scrapper with warranted fewer miles than mine and a history with the local landy independent and bought it complete for £300.
Interesting thought to keep my original engine and repair it
Now I need a replacement radiator or is a recore a better alterantive?
 
juicehills said:
Back again and thanks for all the advice.
I eventually came across a friend who had bought a scrapper with warranted fewer miles than mine and a history with the local landy independent and bought it complete for £300.
Interesting thought to keep my original engine and repair it
Now I need a replacement radiator or is a recore a better alterantive?
Click to expand...

Get a price for both. Last time I got a recore done it was less than half the price of a new rad. Since then prices have fluctuated quite a bit so to be honest you may find there is very little difference in price between a new rad an a recore.
 
IMHO the 300TDi engine in the Discovery is waste of space. The high mounted water pump and the Siamesed centre exhaust ports virtually guarantee head gasket failure if one hooks 3.5 tons onto the tow ball. Some way of getting the header tank higher needs to be looked at. A V engine or even half a V like the 1970s Vauxhall Victor would be much better because the cylinder heads would then be lower. Another way might be to fit a low mounted water pump outboard of the block. I loathe my Discos for their poor cooling system design. Curiously when I was running a Triumph GT6 many years ago there were no problems at all with steam trapping or air venting as even with a low bonnet line the radiator was higher than the engine as it should be. Caveat Emptor and good luck as you will need it!
 
Im confused. First off your replying to a 3year old thread. Then your waffling on about how bad cooling is on a disco. Unless theres a problem disco's and 300tdi are very hardy engines and over cooled in my opinion.
 
Davey1000 said:
IMHO the 300TDi engine in the Discovery is waste of space. The high mounted water pump and the Siamesed centre exhaust ports virtually guarantee head gasket failure if one hooks 3.5 tons onto the tow ball. Some way of getting the header tank higher needs to be looked at. A V engine or even half a V like the 1970s Vauxhall Victor would be much better because the cylinder heads would then be lower. Another way might be to fit a low mounted water pump outboard of the block. I loathe my Discos for their poor cooling system design. Curiously when I was running a Triumph GT6 many years ago there were no problems at all with steam trapping or air venting as even with a low bonnet line the radiator was higher than the engine as it should be. Caveat Emptor and good luck as you will need it!
Click to expand...

You're a penis. I suspect you find the 1.8 k series a reliable engine. Your wife probably reads you instructions every time you attempt to bang her.
 
Davey1000 said:
IMHO the 300TDi engine in the Discovery is waste of space. The high mounted water pump and the Siamesed centre exhaust ports virtually guarantee head gasket failure if one hooks 3.5 tons onto the tow ball. Some way of getting the header tank higher needs to be looked at. A V engine or even half a V like the 1970s Vauxhall Victor would be much better because the cylinder heads would then be lower. Another way might be to fit a low mounted water pump outboard of the block. I loathe my Discos for their poor cooling system design. Curiously when I was running a Triumph GT6 many years ago there were no problems at all with steam trapping or air venting as even with a low bonnet line the radiator was higher than the engine as it should be. Caveat Emptor and good luck as you will need it!
Click to expand...

How do you work that one out then the 300Tdi is one of the best diesel units out there service them right and they last well into the 300,000 mile range
 
You must log in or register to reply here.

Similar threads

M
I need some help with my 1994 Defender 90 300TDI Engine
Replies
4
Views
737
MOLLYPOPPY
M
M
I need some help with my 1994 Defender 90 300TDI Engine
Replies
1
Views
481
miktdish
miktdish
S
Fuel injector pump replacement 300 TDI engine – please help.
Replies
2
Views
2K
D1Nut
D1Nut
1
Big Question
Replies
9
Views
1K
110Matty
1
C
For Sale Freelander 2 TD4 Engine Parts
Replies
0
Views
845
CaptainB
C
Back
Top