300tdi non abs disk change

pauli · Apr 21, 2010

Hi all
I think the rear pads and disks need changing
When I checked out the kits in Paddocks the front kits come with seals and gaskets etc but the back kit only has disks and pads
Does this mean there is no stripping down of the rear hub

Cheers
Paul
PS Must relate a novel way of removing a stuck injector when I have the courage to put it in print

landy.man · Apr 22, 2010

pauli said:
Does this mean there is no stripping down of the rear hub

the rear hub strips down very similar to the front, except you slide the halfshaft out. Be careful not to nick the inner axle oil seal (easier said . .)

You'll need a new paper gasket but the hub inner seal should go again so long as your careful. I always keep a stock of gasket paper just in case "kits" are incomplete

pauli · Apr 22, 2010

Thanks for the advice landy

paul_c · Apr 22, 2010

You'll need one of those thin washers for the hub, which you fold over each of the 52mm hub nuts. (1 each side).

300tdi non abs disk change

pauli

New Member

landy.man

New Member

pauli

New Member

paul_c

New Member

Similar threads