- Posts
- 83,296
- Location
- Embasinga stocæ
Has anyone ever fitted one?
Can it be done?
What is involved?
Can it be done?
What is involved?
300TDi dash into a 200TDi
- Thread starter The Mad Hat Man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
not that familiar with discos but surely there cant be a big difference is there?
Can be done but you need to get the donor car as you need to cut off and re-weld mounting points ect. Then you may need to get gauges recalibrated with particular attention to the speedo because IIRC the 200 is cable driven whilst the 300 is electric and the list goes on as you also need to fit the same heater and control units ect.
I have thought about doing the same to my car and have the tools/know how but I am unsure if the effort is worth it, a complete home made custom dash would probably be easier.
regadrs
Dave
I have thought about doing the same to my car and have the tools/know how but I am unsure if the effort is worth it, a complete home made custom dash would probably be easier.
regadrs
Dave
- Posts
- 83,296
- Location
- Embasinga stocæ
tiz a lot of work, to get the radio to fit nice, then? 
Taffy
Active Member
- Posts
- 470
- Location
- Wrexham North Wales
maybe make up a dashbox out of fibreglass that sit on the flat but and then fit radio in ?so it level with the speedo box etc to the handlebar on passager side etc
that's dreadfull
jeffo
Member
- Posts
- 27
- Location
- mountain ash
hi would like to do my dash the same how did you do it and what materiels did you use
Similar threads
Disco 3 (LR3)
Rear differential swap
