300tdi cambelt issues - what kit?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jongould

Jongould

New Member
Posts
3,185
Location
Colchester
I have just found out my cambelt is going again after six months and after doing a google I have read up on the misalignment issue and the repair kit. It all looks good but im struggling to figure out what kit i need. I have found this from tinterweb:

STC4095K – Kit No 1 – is fitted to vehicles in the following VIN ranges:

Discovery: MA081991 (start of 300Tdi production) to TA200000
MA500000 to VA542370
TA700000 to VA711273

Defender: MA939976 (start of 300Tdi production) to VA101256

RR Classic: MA647645 to MA664120

STC4096K – Kit No 2 – is fitted to vehicles in the following VIN ranges:

Discovery VA542371 to VA 558898
VA711274 to WA748935

Defender VA101257 to VA129096

RR Classic Not applicable – RR Classic was out of production by this time

According to the bulletin, when fitting Option 2, an ERR7143 Seal Crankshaft Front should be fitted to vehicles in the following VIN ranges:

Discovery VA548520 to VA558898
VA716697 to WA748935

Defender VA107351 to VA129096

RR Classic Not applicable – RRC out of production
Click to expand...

Thing is my chassis number doesnt seem to link to either of these kits, my chassis number is TA514295, i can see the up to TA200000 and TA700000 onwards but nothing for my number, unless im missing something here that is. I know nowt about the production numbers for LR engines though so maybe its simple.

Anyone able to help?
 
Last edited:
you use later kit as crank pulley has the belt guides rather than tensioner,individual parts are belt err1092 crank pulley lhh100660,tensioner lhp100860,idler lhv100150
 
You must log in or register to reply here.

Similar threads

G
300TDi cambelt change and fuel pump timing questions
Replies
17
Views
4K
jamesmartin
jamesmartin
ratty
  • Locked
  • Sticky
Hybrid or Ringer?????
Replies
0
Views
26K
ratty
ratty
Back
Top