300tdi cambelt issues - what kit?

[Jongould]

I have just found out my cambelt is going again after six months and after doing a google I have read up on the misalignment issue and the repair kit. It all looks good but im struggling to figure out what kit i need. I have found this from tinterweb:

STC4095K – Kit No 1 – is fitted to vehicles in the following VIN ranges:

Discovery: MA081991 (start of 300Tdi production) to TA200000
MA500000 to VA542370
TA700000 to VA711273

Defender: MA939976 (start of 300Tdi production) to VA101256

RR Classic: MA647645 to MA664120

STC4096K – Kit No 2 – is fitted to vehicles in the following VIN ranges:

Discovery VA542371 to VA 558898
VA711274 to WA748935

Defender VA101257 to VA129096

RR Classic Not applicable – RR Classic was out of production by this time

According to the bulletin, when fitting Option 2, an ERR7143 Seal Crankshaft Front should be fitted to vehicles in the following VIN ranges:

Discovery VA548520 to VA558898
VA716697 to WA748935

Defender VA107351 to VA129096

RR Classic Not applicable – RRC out of production

Thing is my chassis number doesnt seem to link to either of these kits, my chassis number is TA514295, i can see the up to TA200000 and TA700000 onwards but nothing for my number, unless im missing something here that is. I know nowt about the production numbers for LR engines though so maybe its simple.

Anyone able to help?

 

[jamesmartin]

you use later kit as crank pulley has the belt guides rather than tensioner,individual parts are belt err1092 crank pulley lhh100660,tensioner lhp100860,idler lhv100150

 

[Jongould]

you use later kit as crank pulley has the belt guides rather than tensioner,individual parts are belt err1092 crank pulley lhh100660,tensioner lhp100860,idler lhv100150

Thanks for that pal, shall order them up today...