200tdi tweaking f**ked

over the last few weeks after carefully reading the net about haw to tweak me 200tdi for a bit more power got it just right
then i noticed a small leak at the max fuel delivery screw the one with a metal coller on so gave a nip with a 13mm spanner and snap it busted just about managed to tease the remainder out and put one in of a bosch pump from a di transit which i took out leaving all the coller on the screw is the same but i dont know weather it is set the same any ideas please else i will end up having to fit new pump

ere lazy, sorry cant help yer but you the guy after me leather?

RAZ8550TDI said:

ere lazy, sorry cant help yer but you the guy after me leather?

Click to expand...

no probs mate have sourced a set up this end today 100 notes grey leather and as much interior as i want now all i got a do is get the motor going again its a shame because if i had ignored the leak it was doing 30 mpg and like a bat out a hell upto 80 and no smoke !!

might have a play with the screw myself then!

lazydog said:

over the last few weeks after carefully reading the net about haw to tweak me 200tdi for a bit more power got it just right
then i noticed a small leak at the max fuel delivery screw the one with a metal coller on so gave a nip with a 13mm spanner and snap it busted just about managed to tease the remainder out and put one in of a bosch pump from a di transit which i took out leaving all the coller on the screw is the same but i dont know weather it is set the same any ideas please else i will end up having to fit new pump

Click to expand...

Careless .........

You won't need to fit a new pump if you got all of the bust screw out, but you will need to get and fit a correct screw, and set it up properly.

Do it soon ....

CharlesY

there is a god
all sorted now just need to fine tune pump a bit to much smoke when cold there never used to be
but still it is now running proper had to take coller of new screw as would only
tick over and not rev 2.5 CW turns and all hunky dory
got the back seat in looks good now just need some checker plate for the front ones these have the motors so might remove these and just set up with drill had a look at wiring and a touch too much !!
any one else fitted leccy RRC seats in a 200TDI
wont be getting checker plate from here !!!
Sorry our Guillo only cuts to 3mm thick



We can do 2 pcs 350 x 450 x 3mm thick 5 bar teradplate

For £ 65.00 Lump sum
A Company of ThyssenKrupp Services
Cox's Lane, Cradley Heath
West Midlands, B64 5QU
Telephone: 01384 563133, Fax: 01384 563193
email: [email protected]
Website: http://www.thyssenkruppmaterials.co

fook me thats expensive!!!!!!!!!!!!!