Discodad
Well-Known Member
- Posts
- 1,844
- Location
- East Anglia
Recently purchased a second hand safari snorkel for my 200tdi defender.
Shocked at how vulnerable the seal is between the wing and the snorkel
I was going to order a Southdown until I found this:
Great idea WLM. Cheers.
I've got an old disco 300tdi airbox going spare. So I'm thinking about cutting off the side (which includes the 63mm pipe spout).
A friend has offered to plastic weld this to the snorkel. Then a single flexible pipe to the airbox.
Hopefully a simple system with only two joints which will be held with tiger seal and jubilee clips.
Anyone used either of these:
Air Ducting - Silicone Coated Flexible Induction Cold Hot Air Intake Pipe 2 Ply | eBay
63mm 2.1/2" Rubber Reinforced Ducting x 1 Metre | eBay
Shocked at how vulnerable the seal is between the wing and the snorkel
I was going to order a Southdown until I found this:
with the fender snorkel your reliant on a good seal between the wing and the snorkel and the wing and the inner flange get either wrong and its useless
i adapted the safari snorkel on my last fender so the hose from the airbox went direct to the snorkel
![]()
Great idea WLM. Cheers.
I've got an old disco 300tdi airbox going spare. So I'm thinking about cutting off the side (which includes the 63mm pipe spout).
A friend has offered to plastic weld this to the snorkel. Then a single flexible pipe to the airbox.
Hopefully a simple system with only two joints which will be held with tiger seal and jubilee clips.
Anyone used either of these:
Air Ducting - Silicone Coated Flexible Induction Cold Hot Air Intake Pipe 2 Ply | eBay
63mm 2.1/2" Rubber Reinforced Ducting x 1 Metre | eBay