Discodad
Well-Known Member
- Posts
- 1,844
- Location
- East Anglia
Recently purchased a second hand safari snorkel for my 200tdi defender.
Shocked at how vulnerable the seal is between the wing and the snorkel
I was going to order a Southdown until I found this:
Great idea WLM. Cheers.
I've got an old disco 300tdi airbox going spare. So I'm thinking about cutting off the side (which includes the 63mm pipe spout).
A friend has offered to plastic weld this to the snorkel. Then a single flexible pipe to the airbox.
Hopefully a simple system with only two joints which will be held with tiger seal and jubilee clips.
Anyone used either of these:
Air Ducting - Silicone Coated Flexible Induction Cold Hot Air Intake Pipe 2 Ply | eBay
63mm 2.1/2" Rubber Reinforced Ducting x 1 Metre | eBay
Shocked at how vulnerable the seal is between the wing and the snorkel
I was going to order a Southdown until I found this:
with the fender snorkel your reliant on a good seal between the wing and the snorkel and the wing and the inner flange get either wrong and its useless
i adapted the safari snorkel on my last fender so the hose from the airbox went direct to the snorkel
Great idea WLM. Cheers.
I've got an old disco 300tdi airbox going spare. So I'm thinking about cutting off the side (which includes the 63mm pipe spout).
A friend has offered to plastic weld this to the snorkel. Then a single flexible pipe to the airbox.
Hopefully a simple system with only two joints which will be held with tiger seal and jubilee clips.
Anyone used either of these:
Air Ducting - Silicone Coated Flexible Induction Cold Hot Air Intake Pipe 2 Ply | eBay
63mm 2.1/2" Rubber Reinforced Ducting x 1 Metre | eBay