2001 p38 dse eas not pumping up after bcm reset
- Thread starter Tinks58
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
When you say lights are doing what they are supposed too, what are they doing.
Have you got a couple of jacks to lift it off the stops a little?
My spares car usually sits on the stops and I manually inflate it sometimes takes a bit more puff to get it to move.
I don’t know what a kicker actually does.
J
Have you got a couple of jacks to lift it off the stops a little?
My spares car usually sits on the stops and I manually inflate it sometimes takes a bit more puff to get it to move.
I don’t know what a kicker actually does.
J
How do you know you have air in the tank?
If the compressor was tripping the thermal cut off it was running to long, to either try and overcome a leak or just plain worn out.
Have you checked for leaks on the bags and pipes?
If you look in the Range Rover tech section there is a guide that maybe handy for you to follow.
J
If the compressor was tripping the thermal cut off it was running to long, to either try and overcome a leak or just plain worn out.
Have you checked for leaks on the bags and pipes?
If you look in the Range Rover tech section there is a guide that maybe handy for you to follow.
J
