2001 p38 dse eas not pumping up after bcm reset

Hi ppl had the overheat chip go in the compressor putting the go slow hard fault in the bcm repaired the chip and reset the bcm but now car won't raise

Please help need some ideas

What diagnostics are you using, and what did you reset?

J

Reset the bcm with a kicker from p38 spares has reset bcm and has no faults so it says

Compressor is working have air in the tank the lights on dash are doing what there supposed to do but it won't lift

How long has it been down on stops?
Do you have a door open?

J

Has been down on stops for 4 months, and no door open

When you say lights are doing what they are supposed too, what are they doing.
Have you got a couple of jacks to lift it off the stops a little?

My spares car usually sits on the stops and I manually inflate it sometimes takes a bit more puff to get it to move.
I don’t know what a kicker actually does.

J

4 months and no door open

I'll try the Jack's that makes sense thanks ,
The kicker is an obd2 plug in reset tool

How do you know you have air in the tank?
If the compressor was tripping the thermal cut off it was running to long, to either try and overcome a leak or just plain worn out.
Have you checked for leaks on the bags and pipes?

If you look in the Range Rover tech section there is a guide that maybe handy for you to follow.

J