chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Well I ain't the one getting flipping laid these days lol
2" lift kit - anyone fitted one?
- Thread starter disco_mikey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
He's very senior 😉
I wish to correct above statement. I am now getting lots😛
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
Hippo
Lord Hippo
- Posts
- 51,971
He's one of the biggest members on the forum.
ound:
- Posts
- 83,230
- Location
- Embasinga stocæ
He's one of the biggest members on the forum.
I think he meant biggest "member", not most senior.
- Posts
- 83,230
- Location
- Embasinga stocæ
I think you will find that on this forum, he would need a much bigger shovel.
Yu, sir, are in need of a humour transplant. If you think that was offensive, don't upset fanny
.
- Posts
- 14,902
- Location
- Doncaster
FFS
DiscoPol made unseemly comments in reply to your crass idiocy and now you determine he's no good for the forum!
If you read a tad further you'd see he made a drunken mistake. No need to apologise, 'cos he still thinks you're a nobber .. which I'm inclined to agree with somewhat.
Can't you see it was a light-hearted attempt at being funny? You seriously think he actually meant what he said? FFS, it's a line that could be straight out of Monty Python.
Get a humour transplant .. If you read even further you'd also see that DiscoPol makes positive contribution to the forum, and has done for a while .. you have 31 posts, some of which are calling people. If this were in Anything Goes I'd say just **** Off, but it's not so I won't.
dangreenie
New Member
- Posts
- 2
hi all im looking to lift my freelander with the spacers was looking for the suspension lift kit but cant find them any were, is there any thing that needs changing wen i do the lift as new to green laning and didnt want a rusty disco iv herd the camber bolts but were are these located on the freelander if any body has any picutres would be great to no what im working with many thanks
essexpestcontrol
New Member
- Posts
- 484
- Location
- grays, essex
a disco??? your in the wrong section
camber bolts are in the same place on every car
http://www.youtube.com/watch?v=XTfn6x4u00w
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
He's got a Freelander, he didn't want a rusty Disco
I've got a couple of sets of 40mm lift kits left for £150, other than that, Bearmach 50mm kits are £200
Bearmach/Monroe camber pins are approx £50, Eibach around £35 ish last time I checked.
Epicuser
Ex Freelander Owner
- Posts
- 2,393
- Location
- North East Surrey
I can recommend SES88's 40mm lift kit as I have had one fitted for a few months now.
Using it in earnest in 10 days time when I go away with some friends for 3 days of offloading in Wales. Just need to sort out my breathers over the weekend so can go wading in some fairly deep water. Don't worry, I'll tie the the door on so they don't fall off.....
Using it in earnest in 10 days time when I go away with some friends for 3 days of offloading in Wales. Just need to sort out my breathers over the weekend so can go wading in some fairly deep water. Don't worry, I'll tie the the door on so they don't fall off.....
