I have a 1997 Range Rover 2.5 DSE Non starter due to code between Becm and Ecu being lost . Have visited dealer 3 times to have codes reinstalled. Each time I bring it home I open door with fob message centre states 'Alarm triggered' and will crank but fail to start. Battery loss then ensues . Everything else in vehicle is sound except drivers door must be opened with the key and actuator wont work with fob (Passenger door is the same). BECM was fully refurbed 8 months ago. Any thoughts would be appreciated as to the cause of this. On my last legs re this as I am going to sell as a non starter if not resolved. Thanks
1997 2.5 DSE code loss Becm and EcM
- Thread starter robtay1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
hi rob i been having same prob lost 3 times in 6 weeks mine has been put down to plug on a post drivers side it going in wed i let you know how it gets on. yours sounds like you have a door lock problem aswell.
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
for door locks, strip down and grease/fiddle then re assemble!! ask paul(casdive,) it works
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
gav did you see pic of my one true love lol
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Is the fob locking/unlocking the doors as it should? I can sort the BECM problem out if needs be. PM me if you are interested.
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
i did mate,i was ferkin about with mine so didnt reply,
ive been trying to get the eas software to work on my phone and taking nudge bar off.
did you buy the wheels or were they on?
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
i bought them from guy over the road he had them on his. yours looks better without them bars get them on gaybay
