Cothy
Member
- Posts
- 24
- Location
- Elgin, Moray
1997 300TDi Defender Pick-up.
I did not have the luxury of taking a note of what wire went where as "Maggie" came with a "Jury" rigged switch and push button starting system separate from the steering lock and key.
So 1st step was to purchase a new steering column lock and switch, Paddock part number QRF100880 Bearmach part number BR1277.
The male connections on this item are numbered 1,2,3,5.
No.4 is blanked off.
No.2 is a double connector.
The wires that have been re-routed are:-
Brown 4mm Diameter, Live feed.
White 3mm Dia.
White/Red 2mm Dia.
White/Orange 2mm Dia.
So my problem is What colour wire goes to what connector?
Thanks in advance
Cothy
I did not have the luxury of taking a note of what wire went where as "Maggie" came with a "Jury" rigged switch and push button starting system separate from the steering lock and key.
So 1st step was to purchase a new steering column lock and switch, Paddock part number QRF100880 Bearmach part number BR1277.
The male connections on this item are numbered 1,2,3,5.
No.4 is blanked off.
No.2 is a double connector.
The wires that have been re-routed are:-
Brown 4mm Diameter, Live feed.
White 3mm Dia.
White/Red 2mm Dia.
White/Orange 2mm Dia.
So my problem is What colour wire goes to what connector?
Thanks in advance
Cothy