110 County rear seat belts

In the process of bringing a 1995 110 County back to life. There were two cloth trim seats that came with it for the rear with seat belt reels fitted, but no stalks. Any ideas what stalks would have originally been fitted and how? Also one of the seats is missing a support leg... does anyone know if you can buy those?! Thanks

If you mean the middle row of seats rather than the bench seats in the back of the 110 then the stalks are fitted to eyes located on the floor just behind the seats. You should have three seats in middle row of a 110. The middle one has a lap belt only

Birdbrain said:

If you mean the middle row of seats rather than the bench seats in the back of the 110 then the stalks are fitted to eyes located on the floor just behind the seats. You should have three seats in middle row of a 110. The middle one has a lap belt only

Click to expand...

Ok, I guessed as much as I can see holes in the floor. Do the stalks just boot through the floor? Or are there brackets that reinforce them? Tganks

There will be reinforcing beneath them. Can't recall if its actually one of the tub cross member supports - peeing with rain here otherwise I'd get underneath for a look

I’ll have to get underneath then- luckily it’s dry here

I think you need to post pics up of your seats etc. Sounds like to me that your describing the load area seats. 2nd row seats don't have reels attached to them, they fit near to the C Piller under the trim.
There is no leg that can go missing on the 2nd row seats either, but possible on the load area ones.
If your not getting confused between load area and second row then I suspect you have the wrong seats maybe out of a mini bus or something.
Pics will help us and you.