discomania
Well-Known Member
- Posts
- 6,949
Right, I have rolling chassis and new bulkhead, if you change it and I can drive it off and brake and things you get £100...
Think of the experience!
Think of the experience!
£100 for anyone who changes me 90 chassis n bulkhead...
- Thread starter discomania
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
I'll change it for yer for an undred quid.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Think how much time/ money you'll have saved yourself. try £500 and I'll do it fer ya.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
yer fooking kidding it yer?? a complete strip down and rebuild fer £100.. once grunt sobers up he'll withdraw his offer
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Aye but wot'll ya change it inta
discomania
Well-Known Member
- Posts
- 6,949
£500?
discomania
Well-Known Member
- Posts
- 6,949
Shhh... No he won't...
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Aye phone a stealership up or even a backstreet garage and ask them fer a price. get a written quote and put it up on here so you can show everyone how much I've over charged you.
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
He only sed he wanted it changin.. I was gonna change it for my shagged chassis.
discomania
Well-Known Member
- Posts
- 6,949
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
It's about 5% done other 95% is gonna take a while.
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
Whaaa yerve done the hard work theres only a couple of weekends work left in it.
yella
New Member
- Posts
- 15,991
ffs yer cannae drive that man, yerl kill yer sen, yer have a crossply and a radial on the same axle
discomania
Well-Known Member
- Posts
- 6,949
I'll sort it out once I work out the steering issue..
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
fook orf yer steering int got a issue
- Posts
- 83,310
- Location
- Embasinga stocæ
an yo disks are rusty.
The disks you see are, in a word, PHUKT.
But it came with two new vented ones and calipers to suit, but we will use the disks and calipers from the present Def 90 as they are non-vented standard thickness and in good nick.
Might get the rusty ones skimmed. They are hardly worn at all. A light skim and they'll be good as new.
CharlesY
chris_mack
New Member
- Posts
- 962
- Location
- Melbourne, Australia
whats the difference between crossply and radial? i can see they are visually different, but is there any difference in the way they are made?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Cros ply's the steel belting under the rubber goes across the tire radials go round
see this link Tyre Construction and Applications
see this link Tyre Construction and Applications
