What have you done to your Landie today.

[oil dripper]

Great paint job oil dripper not the twenty coats of oilive drab and matt black that you normanly get with the ex mil landys

good job it was synthetic ,hate to think what would av appined if it were,nt

 

[Dent]

Just painted me back bumper with wilko satin black , looked good till I slammed the back door n all the ****e fell out the spare onto it .

 

[Beast o Bodmin]

Just painted me back bumper with wilko satin black , looked good till I slammed the back door n all the ****e fell out the spare onto it .

:mooning::hysterically_laughi:behindsofa:

 

[Trewey]

Fitted the first of me noo wheel arches and sprayed that corner of the Landy.
Will do the rear N/S tomorra, if the weather holds.

 

[Beast o Bodmin]

wheres the mud

 

[Trewey]

I swept up the half hundredweight that fell out when I removed the old wheel-arch.

 

[Beast o Bodmin]

fair.I cleaned out me sills other day.FOOKINELL woops.........

 

[bustersbus]

Got me windscreen brackets from Trewey and tried one on fur size...

Ah had to grind down the front edge of me new door hinges (that ah bought a while ago and panited straight away) to fit the gaskets!
(A word of warning! When buying new door hinges, check that they will fit the gaskets! My ones had a fault in the castings and kicked out at the bottom where it fits the bulkhead. I couldn't find gaskets to fit them anywhere until ah realised what was wrong!)

Ah got me clips for holding the wiring loom, brake pipes and the wee plastic rivets for the loom today so stuck them on..

Then ah held the cover for where the wiring loom comes out to the engine side, marked it, drilled it and fitted it (stuck a piece of wood behind where ah was drillin' incase ah hit any wires)...

 

[nickh75]

done something REALLY strange today




i washed it

hopefully when the engine comes out to do the clutch release bearing i won't get quite so covered in ****e

 

[discobill]

Replaced one of those fecking springs on the o/s rear door lock. Got the front n/s prepped, doing that tomorrow.

 

[Trewey]

Fitted the first of me noo wheel arches and sprayed that corner of the Landy.
Will do the rear N/S tomorra, if the weather holds.

Did the Nearside today.

Front wings next week, weather permitting.

 

[Tig9619]

Finally got the rangey an mot! All that welding the sills and wings did the trick! Brakes are much better without the abs too. Shame the kronky old v8 and auto box are so ****e now! Have a 200tdi and box in the garage which will look lovely in it! all in good time!

 

[ratty]

fitted a bulb and holder to my rear fog light. nearly finnished making my spare wheel cover.

 

[Sirus]

fitted a bulb and holder to my rear fog light. nearly finnished making my spare wheel cover.

How many cornflake packets did you use and did the missus shout at you for using all the sticky backed plastic?

 

[Sirus]

Did the Nearside today.

Front wings next week, weather permitting.

Ere Trewy...you missed a bit




.




of the drive

 

[nickh75]

Did the Nearside today.

Front wings next week, weather permitting.

something wrong here trewwy!


why does that back end around the wheel arch look shiney?

i thought deependers were spozed to be dull an muddy

 

[goonarmy]

Im gonna have a go at me prop tommorrow.If that goes well(as if!)Might have a go at the diff an all......piccies will be posted

 

[nickh75]

Im gonna have a go at me prop tommorrow.If that goes well(as if!)Might have a go at the diff an all......piccies will be posted

good luck

 

[Trewey]

something wrong here trewwy!


why does that back end around the wheel arch look shiney?

i thought deependers were spozed to be dull an muddy

Don't worry.
It'll only last until our next Grinlaning trip.

 

[goonarmy]

good luck

Cheers mate-defo need it!